The Slayer espresso machine sports some remarkable design–in my admittedly biased opinion.  One reason for this has been the involvement of artisans and craftsmen from a range of disciplines from lost-wax sculptural metal casting to knife-making to rapid prototyping through SLA models.

In building the Slayer, we augmented our own knowledge and experience by seeking the help of specialists in each of the disciplines we needed to bring our vision of the World’s Greatest Espresso Machine to reality.

  Read the rest of this entry »

One of the challenges of developing a product from scratch is converting improved concepts of function into new physical forms that are robust and practical–and anticipate the brewing needs of the growing boutique coffee segment.  Traditional European manufacturers of equipment have a huge stake in equipment fashioned to perform a particular way.  Most notably the “Italian Tradition” of espresso brewing. 

Read the rest of this entry »

I’m not one to keep my mouth shut, so the last year and a half have been a struggle for me – especially the last several months. 18 months of planning, arguing designing and delays. Stressed, yet excited as hell to finally give birth to the fruits of of our labor.

We feel that some times you need to throw the baby out with the bath water and simply start over…so thats what we’ve done. Over 2 years ago we started with pages of notes on whats wrong with machines today and lists of what our dream machine would do. We interviewed countless baristas & cafe owners and started building our own versions of what we called Frankenbots. We tested our theories with the ultimate end goal of creating a true barista machine. Read the rest of this entry »

Earlier this month, we switched on the third or fourth refinement (depends on your perspective) of our series of working prototypes.  This machine is meant to demonstrate a lot about how our final machine –  the Slayer — will work as an espresso brewing device when it becomes available to anyone who wants one later this year.  

Up to this point our machine platforms were meant to demonstrate particular concepts, like dry steam production, or shot quality .  .  . or whatever. With iteration number 4, we decided to run the WBC brew temperature stability test to see how the machine would fare if we ever take it there (or maybe when we take it there).  I have posted some of our results in the table below.

Read the rest of this entry »

Most people who are familiar with competitive cooking shows like Iron Chef have a good idea what WBC-sanctioned barista competitions are all about.  They are highly charged extravaganzas where aspiring barista superstars can take on their peers and emerge as the toast of the entire specialty coffee world.  What’s more, the recognition is there, not just for the top placers of the WBC, but for winners of the National and Regional championships as well. The winners from these competitions have been known to go on to sponsor products including equipment for making coffee. Klaus Thomsen, the 2006 WBC winner, co-produced and promoted a home machine on the basis of his uber-barista notoriety.  Winning a major barista championship is often seen as a ringing endorsement for a particular coffee or a local Third Wave cafe.  Think Billy Wilson, Think Stumptown Coffee. Think the Albina Press Cafe in Portland Oregon.  When you are that good at preparing coffee, the coffee you use, or the cafe where you work is of extreme interest to your fellow coffee geeks. The details of your coffee universe may also be of interest to those considering opening a new cafe or re-railing an existing cafe to a higher level. Your talents are admired and desired!

But the road to coffee fame and fortune is not short.  By the time a barista champion has reached the top tiers of competition, they are the veterans of countless smaller competitions and have put in hundreds of hours of practice & preparation.  Their coffee making skill is honed so is their dessert-making ability.  Why desserts?  Because creating a winning high-scoring signature drink these days requires knowledge that goes well beyond coffee basics.

So what do you have to do to get there? 

Read the rest of this entry »

I have attached a picture of the BOSCO espresso machine now in place at the Caffe Vita in Fremont.  

This machine is a classic lever machine.  The use of a spring instead of a pump to provide brew pressure is the main difference between lever machines and conventional, traditional-style espresso machines.  The BOSCO lever has no pump and motor–so brewing is quiet.  

  Read the rest of this entry »

The Season is here, and I hope everyone is enjoying this time of jolly abandon as much as we are–finding an uplifting tonic (figuratively, if not literally) to fend off the doldrums of these long, dark days of the winter solstice. I wish this, indeed, but maybe not as much as all that if you must drive, do calculus, or study for the GRE’s.

But if you are in fair Seattle this holiday, Slayer hopes you seize the opportunity to enjoy the heffeweisens, stout ales, and hearty brews of all descriptions that are being poured by the flagon-full at the numerous breweries and public houses around town. You never know for sure what the future will bring your way, so make sure you enjoy these boisterous beverages and the merry companionship of your groupies, hearties, and special someones in a way that warms your soul and brings a smiling to your heart.

This season has been so merry for our tribe that I nearly forgot to post this one last note–before we bid 2007 farewell and welcome in a new and hopeful year. Forgive me for keeping this missive un-customarily brief. However, I know you will understand what a pull the winter festivities have on our time and attention–and what a toll these activities can wreak on clear writing and logical narrative. However, if you are one of the ones reading this (which is to say, you are) you are welcome to join our table no matter where, so we may hoist a glass of good cheer to you and yours. So to begin. . .

Read the rest of this entry »

There is something about the espresso extracted from a lever machine that is clearly distinct from what we can pull of a standard pump driven espresso machine. Lever shots tend to be much softer and smoother, often sweeter. As well, those who have pulled lever shots are keenly aware of the distinct visual appearance of the espresso as it begins to appear & flow from the portafilter during the initial infusion.

So, the obvious question is why? What is happening during this lever extraction process that is different than what happens on a pump driven machine? Recently we decided to identify the difference and answer some of these questions.

Read the rest of this entry »